The electric arc process is provided by electricity without the need for process gases other than just atomizing with air. The options available in our store and within it balance the scale and convenience requirements to your needs. These pistols apply coatings for restoration and protection against corrosion, wear and erosion.
PPG Series Electric Arc Wire Spray Guns
It is designed for the flexibility of serial automation with PPG gun. The power cable can be positioned vertically or horizontally to facilitate compatibility with a robot system. These pistols can make both hard and soft wire coatings.
Key features
- Quick and simple wire feed change
- There are models that are suitable for mounting on the machine and can be carried by hand.
- Wire feeding consistent with push-pull coordination
- Extension modules for internal hole applications
Features
Maximum current | 400 A | |
Maximum voltage | 39 V | |
Weight | Machine-mounted | 6.3 kg (13.9 lb) |
Handheld | 5.4 kg (11.9 lb) | |
Device compatibility | SmartArc, VisuArc 350 |
LD / U2 Electric Arc Wire Spray Gun
LD / U2 handheld thermal spray gun gun is easy to use and maintenance costs are low. It offers the flexibility to apply coatings on site and in workshops using hard and soft wires.
Features
Maximum current | 350 A |
Maximum voltage | 42 V |
Weight | 2.8 kg (6.2 lb) |
Device compatibility | FlexiArc 200, FlexiArc 300 |
LD / U2E Electric Arc Wire Spray Gun
This machine-mounted gun is for both hard and soft wire coatings. It guarantees a reliable and consistent process even in the most demanding application situations.
Key features
- Heavy-duty machine assembly model
- Easy hardware swap for different wire types
- Extension modules for internal hole applications
- Supports a wide range of coatings, from zinc for corrosion protection to molybdenum coatings to protect the piston rings against wear
Features
Maximum current | 350 A |
Maximum voltage | 42 V |
Weight | 3 kg (6.6 lb) |
Device compatibility | FlexiArc 200, FlexiArc 300, VisuArc 350 |
![](https://dehaendustri.com/resimler/LD-U3.png)
The LD / U3 arc wire gun is a proven anti-corrosion gun that performs on-site coating work in harsh environments such as offshore, marine and steel structures.Key features
- Integrated safety handle prevents injury when the gun is dropped
- Lightweight for long spray runs
- Start or stop spraying instantly
- Wire feeding consistent with push-pull coordination
- Simple and fast maintenance
- Extension modules to access hard-to-reach areas
- Applies zinc, zinc-aluminum, aluminum and aluminum-magnesium coatings
Features
Maximum current | 600 A |
Maximum voltage | 42 V |
Weight | 3 kg (6.6 lb) |
Device compatibility | EcoArc 250, EcoArc 350, EcoArc 600 |
LD / Schub 5 Electric Arc Spray Gun
This light spray gun is used in harsh working environments, resistant to moisture and dust. It is inexpensive, easy to use, and easy to maintain.
Key features
- Work with the TUBE 300 system to coat welded pipe seams
- For coating capacitors, work with the CAP 300 system
- For the use of high-volume production lines powered by VisuArc 350
- Supports a wide range of molybdenum coatings, from zinc for corrosion protection, to protect the piston rings against wear
- There are models suitable for machine and hand machine
- Integrated safety handle prevents injury when the gun is dropped in the handheld model
- Extension modules for internal hole applications
Features
Maximum current | 350 A |
Maximum voltage | 50 V |
Weight | 1.7 kg (3.7 lb) |
Device compatibility | CAP 300, TUBE 300, VisuArc 350 |