The need for harder surfaces that are more resistant to wear and corrosion is provided by our High Speed Oxygen Fuel (HVOF) guns.
WokaStar Series Liquid Fuel Spray Guns
WokaStar series spray guns work with kerosene liquid fuel and oxygen. High particle speed, uniform heating and low waiting time are combined to produce very dense and tightly adhering coatings.
Industries using this model include:
- Oil and Gas
- Pulp and paper
- Steel
- Agriculture
Key features
- Unique design reduces oxygen and kerosene costs
- Low cost process using kerosene as liquid fuel
- Hydrogen or spark ignition gun models available
Features
- Process environment: Hydrogen, Oxygen, Nitrogen, Kerosene, Compressed Air
- Weight: 5 kg (11 lb)
- Device compatibility: MultiKoat HVOF, UniCoatPro LF
WokaJet Series HVOF Liquid Fuel Spray Guns
WokaJet series spray guns work with kerosene liquid fuel and oxygen. High particle speed, uniform heating and low waiting time are combined to produce very dense and tightly adhering coatings.
Industries using this model include:
- Oil and gas
- Pulp and paper
- Steel
- Agriculture
Key features
- Unique design reduces oxygen and kerosene costs
- Low cost process using kerosene as liquid fuel
- Hydrogen or spark ignition gun models available
Features
- Process environment: Hydrogen, Oxygen, Nitrogen, Kerosene, Compressed Air
- Weight: 5 kg (11 lb)
- Device compatibility: MultiKoat HVOF, UniCoatPro LF, JP5000, JP8000, K2
Diamond Jet Series HVOF Gas Fuel Spray Guns
The Diamond Jet series supports a wide range of fuel gas and water or air cooling options.
Features of the produced coatings:
- High density
- Low oxide content
- High adhesion to the surface
- Excellent machinability
These models generally use the following industries:
- Oil and gas
- Pulp and paper
- Biomass / Waste Incineration Plants
- Steel
- Agriculture
Key features
- Choice of configuration
- Modular hardware that is easy to lift and replace
- Low process gas consumption
- Choice of machine-mounted and hand-held models
Features
- Process environment: Hydrogen, Methane, Ethylene, Propylene, Propane, Oxygen, Nitrogen (Carrier Gas)
- Weight: from 1.7 kg (3.7 lb) to 4.1 kg depending on the gun model
- Device compatibility: Machine mounted: MultiKoat HVOF, UniCoat-GF, UniCoat-GLF, DJC, DJCEH, Handheld: DJF with DJFEW
Extension modules
Extension modules for Diamond Jet guns are sprayed at an angle of 90 ° and are supplied with “easily replaceable sprayers” at 45 ° and 60 ° angles. All modules offer a 610 mm (24 in) shaft length for access to the inner surfaces.
| Gun Model | Cooling | Spray head angle | Shaft length | Min. bore diameter |
| DJT-2 | That | 90° | 610 mm (24 in) | 400 mm (16 in) |
| DJT-2 | That | 45° | 280 mm (11 in) | |
| DJT-2 | Air | 90° | 230 mm (9 in) | |
| DJT-2 | Air | 45° | 180 mm (7 in) |
