Wire feed solutions for electric arc thermal spray offer consistent feed speeds, speed adjustment and the ability to interface with various spool types or all drums. Wires are disassembled and pushed or carried by push mechanisms.
Push 1 Wire Transport System
Push 1 wire transport system works using push-pull mechanism. Rubber feed rolls provide a constant pressure in the feed direction. This creates enough looseness in the wire passageway to be able to pull non-resistive wire in the spray gun.
Features
| Engine | Air motor |
| Speed control | Air outlet valve |
| Weight | 2.6 kg (5.7 lb) |
| Device compatibility | FlexiArc 300 |
Push 4 Wire Transport System
Push 4 wire transport system works using push-pull mechanism. Rubber feed rolls provide a constant pressure in the feed direction. This creates enough looseness in the wire passageway to be able to pull non-resistive wire in the spray gun.
Features
| Engine | 230/400 VAC, 90 W | |
| Speed control | İnvertör (supplied with selected controllers only) | |
| Weight | 12 kg (26.4 lb) | |
| Device compatibility | No speed control | EcoArc 350 |
| Speed controlled | EcoArc 600 | |
Push 6 Wire Transport System
Push 6 wire transport system works using push feed mechanism. All-wheel drive feed ensures no slippage during wire transport. The gearbox gearbox is maintenance free and the feed rollers can be easily removed.
Features
| Engine | 230 VAC, 180 W |
| Speed control | Inverter |
| Gear ratio | CAP 300, TUBE 300 için 20:1
100 A low for all other installations 75: 1 |
| Weight | 12 kg (26.4 lb) |
| Device compatibility | TUBE 300, CAP 300 |
Coil unwinding device for reel coils
Coil opening device is suitable for DIN 8559 rollers. Roller holders are equipped with easily adjustable brake systems. These provide sufficient resistance to prevent the wire from being taut and overvoltage.
| Device compatibility | FlexiArc 200, FlexiArc 300, CAP 300, TUBE 300 |
Coil unlocking device for dorn and wire basket coils
Mandrel opening device is suitable for DIN 8559 rollers. Roller holders are equipped with easily adjustable brake systems. These provide sufficient resistance to prevent the wire from being taut and overvoltage. Special adapters are available to make this device compatible with wire basket rollers.
| Device compatibility | FlexiArc 200, FlexiArc 300, CAP 300, TUBE 300 |
Drum wire opening device
With this opening device, you can feed soft wires directly out of standard steel or cardboard rollers. To use, place the center of the drum directly under the first wire guide. The large wheel should be placed at a height where the wire is completely separated from the spiral before being straightened by the two small wheels. A special installation is available to remove the additional stiffness of the aluminum wire.
| Device compatibility | EcoArc 250/350/600, CAP 300, TUBE 300 |
